Description
Rocker-panel and tailgate warning lighting shouldn’t cost a fortune.
Signal Streak combines three synchronized, low-profile LED warning strips with app-based control over colours, patterns, speed and brightness. Build a setup that works for your vehicle, save your favourite effects and change the entire look directly from your phone.
*The included controller is app-controlled; an optional V3 controller with four programmable trigger-wire inputs will be available soon as an add-on upgrade.
Choose Your Kit Size
Compact Kit
-
Three 49″ LED strips
Standard Kit
-
Two 60″ LED strips
-
One 49″ LED strip
XL Kit
-
Two 78″ LED strips
-
One 49″ LED strip
The longer strips are ideal for rocker panels, running boards and vehicle sides, while the 49″ strip can be installed across a tailgate, rear window or other suitable mounting surface.
Fully Customizable App Control
-
200 colour configurations
-
Customizable warning patterns
-
Adjustable pattern speed and brightness
-
Dynamic, solid-colour and DIY modes
-
Save favourite effects for quicker access
-
Three synchronized LED strips
-
Bluetooth app-based control
Fixed Wiring Configuration
The controller is not waterproof and must be installed inside the vehicle in a dry location.
A fixed 3 m/10′ main cable runs from the controller to the three-port Y-splitter. Each splitter output then has a fixed 1.5 m/5′ extension running to its LED strip.
This provides approximately 4.5 m/15′ of cable routing from the controller to each strip.
Additional extensions cannot be added to this system. Measure the complete planned cable route not just the straight-line distance, before ordering.
All three kit sizes include the same wiring lengths.
Features
-
Three full-colour LED warning strips
-
12V vehicle operation
-
60 LEDs per metre
-
IP68-rated strip assemblies
-
Flexible, low-profile construction
-
Black circuit board for a discreet appearance
-
VHB adhesive backing
-
Supplemental mounting clips
-
Fused power harness
-
Quick-connect wiring system
What’s Included
-
Three LED strips in the selected kit size
-
Bluetooth app controller
-
Fused 12V power harness
-
Fixed 3 m/10′ controller-to-splitter cable
-
Three-port Y-splitter
-
Three fixed 1.5 m/5′ extension cables
-
Installation clips and mounting accessories
Important Installation Information
The IP68 rating applies to the LED strip assemblies. The controller must remain protected from water, moisture and direct exposure to the elements.
Vehicle-lighting laws and permitted warning colours vary by location and application. The purchaser is responsible for using colours and patterns permitted in their jurisdiction.
Backed by the Strobe My Ride 3-Year No-BS Warranty.
One kit. Three strips. Endless possibilities.
Be Seen. Be Safe.