PatrolLink Dual Y-Cable – Plug & Play / External Flasher

One cable run. Two lightheads. Build it your way.

The PatrolLink Dual Y-Cable provides a clean, pre-wired way to connect two compatible warning lightheads from a single cable run.

Use it as part of a complete PatrolLink Plug & Play system, or adapt it for a conventional installation with a compatible external flasher, warning-light controller or switch system.

Available in multiple lengths, the Dual Y-Cable makes it easy to choose the right cable run for your vehicle without building a wiring harness from scratch.

PatrolLink Plug & Play

Building a PatrolLink system? Simply connect the Y-Cable into your compatible PatrolLink components and connect a lighthead to each branch.

The pre-wired connectors provide quick installation and make individual lightheads easy to disconnect for replacement, servicing or future changes.

No cutting. No splicing. No custom harness required.

External Flasher & Custom Installations

You don't need a PatrolLink controller to take advantage of the PatrolLink cabling system.

When using compatible PatrolLink steady-burn lightheads with an external flasher or warning-light controller, the Dual Y-Cable can be used as a pre-wired dual-light quick-disconnect harness.

Keep the factory Plug & Play connectors at the lighthead ends and cut the connector at the controller end of the cable to expose the individual wiring for termination into your compatible external flasher, controller or switching system.

This gives you:

• Pre-made cable routing
• Two lighthead connections from one harness
• Quick-disconnect connections at both lightheads
• No custom wiring between the controller area and lightheads
• Easy lighthead removal or replacement
• A clean way to integrate PatrolLink lightheads with external control systems

Features

• Connects two compatible PatrolLink lightheads
• Available in 3m, 4.5m, 6m and 9m lengths
• PatrolLink Plug & Play compatible
• External flasher compatible when adapted
• Pre-wired dual-light harness
• Quick-disconnect lighthead connections
• Can be cut and terminated at the controller end for conventional installations
• No splicing required along the cable run
• Ideal for external flashers and warning-light controllers
• Suitable for custom upfitter installations
• Compatible with PatrolLink Extension Cables
• Replacement, expansion or Build Your Own component
• Patrol Line 3-Year No-BS Warranty

Two Ways to Install

PATROLLINK PLUG & PLAY

Control Module → Dual Y-Cable → 2 × PatrolLink Lightheads

EXTERNAL FLASHER / CONTROLLER

External Flasher → Cut/Terminated Controller End → Dual Y-Cable → Quick-Disconnects → 2 × Steady-Burn Lightheads

The result is a clean modular installation whether you're using the complete PatrolLink system or your own external controller.

Available Lengths

3m / 9.8 ft
Ideal for compact vehicles and shorter cable runs.

4.5m / 14.8 ft
A versatile mid-length option for cab, deck and body installations.

6m / 19.7 ft
Additional reach for larger vehicles and longer front-to-rear routing.

9m / 29.5 ft
Designed for long vehicle installations where substantial cable length is required.

Installation Note

When adapting a Y-Cable for conventional wiring, cut only the controller-side connector intended for termination. Confirm individual wire functions before connecting to an external flasher or controller.

Cutting the connector permanently converts that end from PatrolLink Plug & Play operation unless a compatible connector is reinstalled.

Plug & Play. External Flasher. Modular.

Build It Your Way.

Be Seen. Be Safe.