Signal Flare 360 SyncCase

SignalFlare 360 SyncCase

Command the scene. Deploy a synchronized 360° warning zone in seconds.

The SignalFlare 360 SyncCase is a portable multi-colour LED warning system designed for fast roadside deployment, incident-scene control and temporary traffic management.

Available in 4, 6 and 8-light kits, each system includes an easy-to-carry briefcase-style charging case that keeps every flare organized and charges all units at the same time.

Remove the flares, position them around the scene and select a synchronized or sequential flash pattern. Place them directly on the ground, set up a visible lane taper, attach them to a magnetic surface or slide them over the top of standard traffic cones.

Ideal for towing and recovery operators, emergency services, roadside assistance vehicles, construction crews, utility fleets and traffic-control professionals.

Command the Scene

Use the SignalFlare 360 SyncCase to:

• Establish visible lane tapers

• Create advance-warning zones

• Mark incident-scene boundaries

• Direct approaching traffic

• Identify disabled vehicles

• Outline temporary work areas

• Increase visibility around roadside personnel

• Create synchronized warning lines or perimeters

The synchronized and sequential patterns allow each flare to operate as part of one coordinated warning system.

Easy Carry-and-Deploy Charging Case

Each kit includes a briefcase-style charging case designed for fast transport, storage, deployment and charging.

• Keeps every SignalFlare together and organized

• Easy to carry directly to the scene

• Charges all included flares simultaneously

• Allows fast deployment and collection

• Keeps the complete system ready for the next call

Charging Configurations

4-Light SyncCase Kit

• USB-C rechargeable charging case

• Charges all four flares simultaneously

6-Light SyncCase Kit

• USB-C rechargeable charging case

• Charges all six flares simultaneously

8-Light SyncCase Kit

• Includes a 12V cigarette-lighter-style vehicle charging plug

• Charges all eight flares simultaneously

Features

• Available in 4, 6 and 8-light kits

• Multi-colour RGB LED warning output

• Automatic wireless synchronization

• Synchronized and sequential flash patterns

• Bright 360° illumination

• 30 high-output SMD LEDs per flare

• 15W output per flare

• Up to 10-metre wireless synchronization range

• Colour and flash-pattern memory

• Charges every flare in the kit simultaneously

• Easy-to-carry charging and deployment case

• Place directly on the ground or roadway

• Slides over the top of standard traffic cones

• Three integrated magnets per flare

• Reflective strips provide additional passive visibility

• Durable TPR and polycarbonate construction

• IPX7 water-resistant construction

• Rechargeable lithium battery in each flare

• Approximately 8 to 50 hours of runtime depending on the selected pattern

Synchronized Flash Patterns

• Sequential Flash

• Synchronized Flash

• Sequential Fast Single Flash

• Sequential Double Flash

• Breathing Flash

Use the synchronized patterns to create a coordinated warning perimeter or select a sequential pattern to establish a highly visible lane taper or directional warning line.

Deployment Options

Ground Deployment

Place the SignalFlares directly on the roadway, shoulder or surrounding ground to establish an advance-warning zone, incident perimeter or temporary hazard area.

Lane Taper Deployment

Space the synchronized flares along the roadway to create a visible lane taper that helps guide approaching traffic away from the hazard.

Traffic Cone Deployment

Slide each SignalFlare over the top of a standard traffic cone to increase its height and visibility while maintaining a synchronized or sequential pattern.

Magnetic Mounting

Three integrated magnets allow each flare to attach to vehicles, equipment and other magnetic metal surfaces.

Technical Specifications

• LEDs: 30 × 2835 SMD LEDs per flare

• Output: 15W per flare

• Colour Output: Multi-colour RGB

• Battery: 3.7V 2200mAh rechargeable lithium battery

• Runtime: Approximately 8 to 50 hours depending on pattern

• Charging Time: Approximately 6 to 7 hours

• Synchronization Range: Up to 10 metres

• Dimensions: 173 × 173 × 43 mm

• Centre Opening: 92 × 43 mm

• Construction: TPR and polycarbonate

• Water Resistance: IPX7

• Mounting Options: Ground, roadway, traffic cone or magnetic metal surface

Available Kit Sizes

4-Light SyncCase Kit

A compact warning system for roadside assistance vehicles, service trucks, pilot vehicles, personal emergency kits and smaller incident scenes.

6-Light SyncCase Kit

Provides additional coverage for towing and recovery vehicles, utility fleets, construction crews and roadside operations.

8-Light SyncCase Kit

Maximum coverage for larger incident scenes, extended lane tapers, emergency response vehicles and professional traffic-control operations.

Ideal For

• Towing and vehicle recovery

• Fire and emergency response

• Roadside assistance

• Construction and maintenance zones

• Utility and municipal fleets

• Pilot and escort vehicles

• Lane tapers and traffic diversion

• Disabled commercial vehicles

• Parking and event traffic management

• Temporary hazard-zone identification

Warranty

1-Year Limited Manufacturer’s Warranty

The warranty covers manufacturing defects in materials and workmanship under normal intended use.

The warranty does not cover damage caused during deployment or use, including:

• Impact damage

• Crushing or being driven over

• Dragging or abrasion

• Vehicle contact

• Improper charging

• Misuse or improper handling

• Modification or disassembly

• Water intrusion caused by physical damage

• Normal wear and tear

• Cosmetic damage from regular roadside use

These flares are designed for active roadside and incident-scene deployment. Surface wear, scratches, cosmetic damage and damage resulting from being struck, dragged, crushed or driven over are not considered manufacturing defects.

Important

Warning-light colour regulations vary by jurisdiction. Red, blue and other restricted warning colours may only be used by authorized vehicles or personnel in certain areas.

The purchaser is responsible for ensuring that the selected colour and application comply with all applicable laws and regulations.

Portable warning flares are supplementary warning devices and do not replace legally required vehicle lighting, approved traffic-control equipment or established roadside safety procedures.

Command the scene. Control the approach. Keep every light working together.

Be Seen. Be Safe.